Thanks to everyone who guessed about my latest contraption in my last post. You all guessed correctly. You are a smart bunch. Even you, Charles.
No, actually, as Juan and Rick guessed, it is to hold the oxygen and acetylene tanks that I just got. Charles–Fugetaboutit.
My next task on the house is to make frames for windows, cut holes for windows, and fix the frames in the holes. So far, I’ve been cutting the container walls with a steroidal 9-inch angle grinder with a metal cutting disk. But let’s face it, this is really arduous and dangerous. Arduous because it takes a lot of muscle power, and dangerous because of the propensity for the machine to kick back and sever body parts. I’ve written before about my plasma torch that died an electronic death, not to be revived here in the harsh Panamanian climate of rust, humidity, electrical brown outs and power spikes, and geckos that have the propensity of dying on circuit boards, “melting,” and shorting out the whole mess.
So that leaves two choices:
Choice 1: Hammer and chisel. I remember when I was first investigating Panama as a place for us to live, I stayed at a hotel in Boquete. Early one morning, 6:15 to be exact, I heard a hammer pounding a chisel on metal. It didn’t stop. Finally I got up and got dressed and went to check it out. Two men were cutting strips off of 20-foot lengths of sheet metal roofing. No angle grinder, no plasma torch, no shears, and, bringing me to choice number two, no oxy-acetylene cutting torch.
Choice 2: Oxy-acetylene cutting torch. A torch is really low-tech. No electrical parts, no computer, just a hot flame that slices through metal. The cost had been stopping me, but it was finally time to bite the bullet and buy a rig.
I got a medium duty Victor brand set, complete with welding/cutting torch, hose, and gauges for the oxygen and acetylene. $245 at Pemco in Panama City. Victor is an excellent brand and I like the way the torch balances in my hand. Tools like this are exciting.
Next, I needed to rent the oxygen and acetylene tanks. $300 deposit for the two tanks, plus $75 for the gas in the tanks. I could have bought the tanks, but I would have had to return to the city each time they needed refilling. With the rentals, I can just swap them locally at the hardware store.
But they don’t just deliver out here in the hinterlands. The tanks need to be transported upright and I had no way to accomplish this with the Honda Ridgeline. So I welded up a goalpost rack for the truck. I used the existing tie-down fixtures in the bed of the pickup to affix my rack.
I used the goalpost rack again today to transport two, heavy eight-foot lengths of 4″x6″x1/4″ angle iron that I picked up for my next shop project, a sheet metal bending brake. But I digress.
The point of this post is the cart that I just made to hold the oxygen and acetylene tanks in my shop, and to make it easier to move them around the job. Here are some photos of the cart ready for paint:
I pretty much started the project by holding a length of 1.5″ square tubing in my hands and holding it up to the tanks. The rest just followed element by element. I love the lines, kind of retro, like something that would have been in my grandfather’s shop. I think it has a little Steampunk look about it. I considered clear coating it, but safety yellow won out.
And here it is with the tanks loaded and strapped in with the safety chains across the tanks and an additional anti-theft chain.
So that’s that, I am now ready to cut the window openings in the container walls. I’ve just picked up the windows I had fabricated, so my next post will about windows.
Thanks for all your comments on the Name That Contraption post. That’s all for now.